Engineering
Engineering, 26.08.2019 22:30, 130005401

You plan to take your hair dryer to europe, where the electrical outlets put out 240 v instead of the 120 v seen in the united states. the dryer puts out 1700 w at 120 v. (a) what could you do to operate your dryer via the 240-v line in europe? (b) what current will your dryer draw from a european outlet? (c) what resistance will your dryer appear to have when operated at 240 v?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
image
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
image
Engineering, 04.07.2019 19:20, carterdaw
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
image
Engineering, 05.07.2019 19:10, justin20080
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Do you know the correct answer?
You plan to take your hair dryer to europe, where the electrical outlets put out 240 v instead of th...

Questions in other subjects:

Konu
Mathematics, 03.04.2021 21:10
Konu
Mathematics, 03.04.2021 21:10
Konu
History, 03.04.2021 21:10