Engineering, 23.08.2019 03:20, chjam265

Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. a cold- worked tensile strength in excess of 825 mpa and a ductility of at least 12%el are desired. furthermore, the final diameter must be 8.9 mm. explain how this can be accomplished?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Do you know the correct answer?

Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the...