Engineering, 22.08.2019 18:20, Harini5721

Arear wheel drive car of mass 1000 kg is accelerating with a constant acceleration without slipping from 0 to 60 m/s in 1 min. what will be friction force acting on each rear wheel of the car? 1000 n 6 n 3 n 500 n

Answers: 2

Show answers

Answers

answered: ganlysiai

The force that acts on the wheels equals 1000 Newtons

Explanation:

We know acceleration is defined as

$a=\frac{\Delta v}{\Delta t}=\frac{v_{2}-v_{1}}{t_{2}-t_{1}}\\\\\therefore a=\frac{60-0}{60-0}=1m/s^{2}$

Now using newton's second law we have

$F_{ext}=m\times a\\\\\therefore F_{ext}=1000\times 1=1000N$

answered: Guest

Infrared sensor is most used sensor in wireless technology where remote controlling functions and detection of surrounding objects/ obstacles are involved. this post will discuss about what is infrared sensor, its working principle, how it works, types, applications, advantages and disadvantages. what is infrared sensor

ir sensor is a simple electronic device which emits and detects ir radiation in order to find out certain objects/obstacles in its range. some of its features are heat and motion sensing.

ir sensors use infrared radiation of wavelength between 0.75 to 1000µm which falls between visible and microwave regions of electromagnetic spectrum. ir region is not visible to human eyes. infrared spectrum is categorized into three regions based on its wavelength i.e. near infrared, mid infrared, far infrared.

wavelength regions of infrared spectrum

near ir – 0.75µm to 3 µm
mid ir – 3 µm to 6 µm
far ir – > 6 µm
1 introduction to infrared sensor

fig. 1 – introduction to infrared sensor

working principle of infrared sensor

infrared sensors works on three fundamental physics laws:

planck’s radiation law: any object whose temperature is not equal to absolute zero (0 kelvin) emits radiation.
stephan boltzmann law: the total energy emitted at all wavelengths by a black body is related to the absolute temperature.
wein’s displacement law: objects of different temperature emit spectra that peak at different wavelengths that is inversely proportional to temperature.
key elements of infrared detection system

the key elements of infrared detection system are:

ir transmitter

ir transmitter acts as source for ir radiation. according to plank’s radiation law, every object is a source of ir radiation at temp t above 0 kelvin. in most cases black body radiators, tungsten lamps, silicon carbide, infrared lasers, leds of infrared wavelength are used as sources.

transmission medium

as the name suggests, transmission medium provides passage for the radiation to reach from ir transmitter to ir receiver. vacuum, atmosphere and optical fibers are used as medium.

ir receiver

generally ir receivers are photo diode and photo transistors. they are capable of detecting infrared radiation. hence ir receiver is also called as ir detector. variety of receivers are available based on wavelength, voltage and package.

ir transmitter and receivers are selected with matching parameters. some of deciding specifications of receivers are photosensitivity or responsivity, noise equivalent power and detectivity.

answered: Guest

Bugatti because Ferrari bootay

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Do you know the correct answer?

Arear wheel drive car of mass 1000 kg is accelerating with a constant acceleration without slipping...