Engineering, 22.08.2019 04:10, michelleperezmp58

An axial flow compressor of50 percent reaction design has blades with inlet and outlet angles at 45oand 10orespectively. the compressor is to produce a pressure ratio of 6: 1 with overall isentropic efficiency of 0.85when inlet static temperature is 37°c. the blade speed and axial velocity are constant throughout the compressor. assuming a value of 200 m/s for blade speed. find the number of stages required if the work done factor is (a) unity and (b) 0.87.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Do you know the correct answer?

An axial flow compressor of50 percent reaction design has blades with inlet and outlet angles at 45o...