Engineering, 22.08.2019 00:30, avagracesmith5
Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. assume an isentropic efficiency of 90% for the turbine. (a) assume air to be an ideal gas with constant specific heats at the anticipated average temperature of 400 k. why is it safe to do so? (6) solve for the actual work per unit of mass produced by the turbine. (c) determine the actual outlet temperature of the turbine. (d) draw the t-s diagram for the air passing through the turbine (show the actual and isentropic processes). (e) how much entropy will be generated per unit of mass while the turbine is running?
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Do you know the correct answer?
Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. as...
Questions in other subjects:
History, 02.10.2019 01:00
Business, 02.10.2019 01:00
French, 02.10.2019 01:00
