Engineering, 21.08.2019 01:30, cece9080
Anormal shock wave takes place during the flow of air at a mach number of 1.8. the static pressure and temperature of the air upstream of the shock wave are 100 kpa (abs.) and 150c. determine the mach number, pressure and temperature downstream of the shock.
Answers: 3
= Specific Heat ratio of air
![\frac{T_{1}}{T_{o}}=\frac{[2\gamma M^{2}-(\gamma -1)][(\gamma -1)M^{2}+2]}{(\gamma +1)^{2}M^{2}}](/tpl/images/0183/3642/b260b.png)
![\frac{T_{1}}{423}=\frac{[2\times 1.4\times 1.8^{2}-(1.4-1)][(1.4-1)1.8^{2}+2]}{(1.4+1)^{2}\times 1.8^{2}}\\\\\therefore \frac{T_{1}}{423}=1.53\\\\\therefore T_{1}=647.85K=374.85^{o}C](/tpl/images/0183/3642/bf1c9.png)
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10, justkevin1231
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
Do you know the correct answer?
Anormal shock wave takes place during the flow of air at a mach number of 1.8. the static pressure a...
Questions in other subjects:
Geography, 14.11.2020 05:30
Biology, 14.11.2020 05:30
Mathematics, 14.11.2020 05:30
Chemistry, 14.11.2020 05:30
