Engineering, 21.08.2019 01:30, HammondE

Asquare thread power screw is designed to provide 150n of lifting force at a rate of 15mm/s. the power screw is driven directly by a motor. the screw has a nominal diameter of 12mm and a pitch of 3mm. the screw-nut combination has a coefficient of friction of 0.06 and there is a 30mm diameter collar with a coefficient of friction of 0.08. a. determine the total torque required to lift the load as described b. determine the required power of the motor c. determine the factor of safety for torsion failure at the root diameter

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Do you know the correct answer?

Asquare thread power screw is designed to provide 150n of lifting force at a rate of 15mm/s. the pow...