Engineering, 20.08.2019 22:20, yogibear5806

Water is the working fluid in a rankine cycle with reheat. the turbine and the pump have isentropic efficencies of 80%. superheated vapor enters the turbine at 10 mpa, 480 °c, and the condenser pressure is 6 kpa. steam expands through the first-stage turbine to 0.7 mpa and then is reheated to 480°c. determine for the cycle(a) the rate of heat addition, in kj per kg of steam entering the first-stage turbine.(b) the thermal efficiency.(c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water, in kj per kg of steam entering the first-stage turbine.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:10, moneyyfletcher

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

continue

Do you know the correct answer?

Water is the working fluid in a rankine cycle with reheat. the turbine and the pump have isentropic...