Engineering, 20.08.2019 19:10, kenziewinkler7510
Air enters a 27-m long 5-cm diameter adiabatic duct at a velocity of 85 m/s, static temperature of 450 k and a static pressure of 220 kpa. the average friction factor (4) for the duct is estimated to be 0.023. determine: (i)- mach number at the exit. (ii)the mass flow rate of air.(iii) what is the length that needs to be added (or subtracted) for the flow to reach sonic conditions at the exit?
Answers: 2
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Air enters a 27-m long 5-cm diameter adiabatic duct at a velocity of 85 m/s, static temperature of 4...
Mathematics, 18.11.2020 18:50
History, 18.11.2020 18:50
Chemistry, 18.11.2020 18:50
Mathematics, 18.11.2020 18:50
Biology, 18.11.2020 18:50