Engineering, 20.08.2019 18:30, briyantesol
Heated air at 1 atm and 25°c is to be transported in a 250 m long circular duct at a rate of 0.45 m/s. if the head loss in the pipe is not to exceed 20m, determine the minimum diameter of the duct.
Answers: 2
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 19:10, shunna33
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
Heated air at 1 atm and 25°c is to be transported in a 250 m long circular duct at a rate of 0.45 m/...
Biology, 05.10.2020 03:01
Mathematics, 05.10.2020 03:01
Chemistry, 05.10.2020 03:01
Mathematics, 05.10.2020 03:01