Engineering, 17.08.2019 19:10, kaitlynngrace15

Water is the working fluid in a rankine cycle. superheated vapor enters the turbine at 8 mpa, 5608c with a mass flow rate of 7.8 kg/s and exits at 8 kpa. saturated liquid enters the pump at 8 kpa. the isentropic turbine efficiency is 88%, and the isentropic pump efficiency is 82%. cooling water enters the condenser at 188c and exits at 368c with no significant change in pressure. determine (a) the net power developed, in kw. (b) the thermal efficiency. (c) the mass flow rate of cooling water, in kg/s.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Do you know the correct answer?

Water is the working fluid in a rankine cycle. superheated vapor enters the turbine at 8 mpa, 5608c...