Engineering, 07.08.2019 19:30, pwolfiimp4
Apair of mating steel spur gears with a 0.75-in face width transmits a load of 40 lbf. for estimating the contact stresses, make the simplifying assumption that the teeth profiles can be treated as cylindrical with instantaneous radii at the contact point of interest of 0.47 in and 0.62 in, respectively. estimate the maximum contact pressure and the maximum shear stress experienced by either gear.
Answers: 2
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Apair of mating steel spur gears with a 0.75-in face width transmits a load of 40 lbf. for estimatin...
Mathematics, 16.01.2021 23:20
Social Studies, 16.01.2021 23:20
Mathematics, 16.01.2021 23:20
Mathematics, 16.01.2021 23:20
Chemistry, 16.01.2021 23:20
Mathematics, 16.01.2021 23:20