Engineering, 07.08.2019 19:10, rameseshajj
A150-mm pipe is connected to the side of a water tank at a depth of 8 m. a 50-mm diameter nozzle is connected to the end of pipe. for steady water surface in the tank and no losses in the system, determine the velocity of jet and the pressure inside the pipe
Answers: 1
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
A150-mm pipe is connected to the side of a water tank at a depth of 8 m. a 50-mm diameter nozzle is...
Mathematics, 20.11.2019 05:31
Mathematics, 20.11.2019 05:31
Mathematics, 20.11.2019 05:31
Mathematics, 20.11.2019 05:31
Mathematics, 20.11.2019 05:31