Air enters the diffuser of a turbojet engine at 18 kpa, 216 k, with a volumetric flow rate of 230 m3/s and a velocity of 265 m/s. the compressor pressure ratio is 15, and its isentropic efficiency is 93%. air enters the turbine at 1360 k and the same pressure as at the exit of the compressor. the turbine isentropic efficiency is 95%, and the nozzle isentropic efficiency is 97%. the pressure at the nozzle exit is 18 kpa. on the basis of an air-standard analysis, calculate the thrust magnitude, in kn.

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?