Engineering, 07.08.2019 04:30, morganhines181

Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled by air at 5°c with a convection heat transfer coefficient of 30 w/m^2 k. if the initial temperature of the plate is 300°c, determine the plate temperature gradient at the surface after 3 minutes of cooling. hint: use the lumped system analysis to calculate the plate surface temperature. make sure to verify the application of this method to this problem

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Do you know the correct answer?

Ametal plate (k=180 w/m-k, p-=2800 kg/m, and cp=880 j/kg k) with a thickness of 1 cm is being cooled...