Engineering, 07.08.2019 02:20, Rayzamartinez2757

Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the plate is 2500 w/m2, of which 500 w/m2 is reflected. the plate is at 227 c and has an emissive power of 1200 w/m2. air at 127 c flows over the plate with a heat transfer convection coefficient of 15 w/m2 k. determine the emissivity, absorptivity, and radiosity of the plate. what is the net heat transfer rate per unit area?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Do you know the correct answer?

Consider an opaque horizontal plate that is well insulated on its back side. the irradiation on the...