Engineering
Engineering, 05.08.2019 18:30, anggar20

Atest bottle containing just seeded dilution water has its do level drop by 0.8 mg/l in a 5-day test. a 300 ml bod bottle filled with 30 ml of wastewater and the rest with seeded dilution water experiences a drop of 7.3 mg/l in the same period (5-day). calculate the bod5 of the wastewater.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 04.07.2019 19:10, ndaha
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
image
Engineering, 06.07.2019 03:20, Anonymous7170
Explain in your own word the concept of a solid solution, in alloys, and how it can be created.
Answers: 3
image
Engineering, 06.07.2019 03:20, shelbellingswo
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
Do you know the correct answer?
Atest bottle containing just seeded dilution water has its do level drop by 0.8 mg/l in a 5-day test...

Questions in other subjects:

Konu
Mathematics, 12.07.2019 15:30
Konu
Mathematics, 12.07.2019 15:30