Engineering
Engineering, 02.08.2019 19:30, lilquongohard

Where σ(t) and σ(0) represents the time-dependent and initial (i. e., time =0) stresses, respectively, and t and τ denote elapsed time and the relaxation time; τ is a time-independent constant characteristic of the material. a specimen of some viscoelastic polymer with the stress relaxation that obeys equation above was suddenly pulled in a tension to a measured strain of 0.33; the stress necessary to maintain this constant strain was measured as a function of time. determine er(6) for this material if the initial stress level was 3.1 mpa (440 psi), which dropped to 0.33 mpa (47 psi) after 46 s.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Do you know the correct answer?
Where σ(t) and σ(0) represents the time-dependent and initial (i. e., time =0) stresses, respectivel...

Questions in other subjects:

Konu
Chemistry, 30.08.2021 03:20
Konu
Mathematics, 30.08.2021 03:20