Engineering
Engineering, 30.07.2019 20:30, babygail0818

Saturated steam at 4 bars absolute pressure with a mean velocity of 3 m/s flows through a horizontal pipe whose inner and outer diameters are 55 and 65 mm, respectively. the heat transfer coefficient for the steam flow is known to be 11,000 w/m2·k. if the pipe is covered with a 35-mm-thick layer of 85% magnesia insulation and is exposed to atmospheric air at 25°c, determine the rate of heat transfer by free convection to the room per unit length of the pipe. if the steam is saturated at the inlet of the pipe, estimate its quality at the outlet of a pipe 50 m long. start with the assumption that 60°c, then calculate the corresponding heat-transfer coefficient and a new estimate of . do not iterate. properties of the steam are 566 kj/kg, 2727 kj/kg, 2160 kj/kg, 416 k, and 0.476 m3/kg. evaluate the properties of the 85% magnesia insulation at 310 k. obtain the nusselt number using the churchill and chu correlation for the long horizontal cylinder.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Do you know the correct answer?
Saturated steam at 4 bars absolute pressure with a mean velocity of 3 m/s flows through a horizontal...

Questions in other subjects:

Konu
English, 18.05.2021 18:30