2. a rectangular plate of width 50 mm and thickness 10 mm has a centrally located hole of diameter 15 mm. calculate the maximum stress at a point on the hole if the internal bending moment at the cross section is known to be 45 n. m. round-up your answer to the nearest mpa.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.