Engineering
Engineering, 26.07.2019 18:20, tonehasarathi

Ashaft is loaded in 2kn tension and 100nm torsion. the shaft is made of steel with a 15mm diameter. a. draw the free body diagram for the loading as described. b. determine the normal stress from tension determine the maximum shear stress from torsion d. draw the 2d stress element for the combined load e. determine the maximum normal stress and principal stresses

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Do you know the correct answer?
Ashaft is loaded in 2kn tension and 100nm torsion. the shaft is made of steel with a 15mm diameter....

Questions in other subjects:

Konu
Mathematics, 17.12.2021 03:00