Engineering, 26.07.2019 18:20, barattah

A300ft long section of a steam pipe whose diameter is 4in passes through an open space at 0°f. the average temperature of the outer surface of the pipe is measured to be 300°f, and the average heat transfer coefficient on the surface is determined to be 7.5 btu/h. ft^2.f. determine: (a) the rate of heat loss from the steam pipe (b) the annual cost of this energy loss if steam is generated in a natural gas furnace having efficiency of 85% and the price of natural gas is $1.20/therm (1 therm = 100,000btu)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Do you know the correct answer?

A300ft long section of a steam pipe whose diameter is 4in passes through an open space at 0°f. the a...