Engineering, 26.07.2019 17:30, amberwithnell12512

A1.5 inch hole is drilled 10 feet below the surface of a large cylindrical vessel, 6 feet in diameter. the top is open to the atmosphere and the vessel which is filled with sea water (sg 1.05) begins to drain through the hole. what is the average initial velocity of the fluid raining out the drilled hole, and what is the flow rate of the fluid in standard us units.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

A1.5 inch hole is drilled 10 feet below the surface of a large cylindrical vessel, 6 feet in diamete...