Engineering

Engineering, 26.07.2019 17:20, trint4

In machining, if the cost to purchase/regrind the cutting tool=$0.00, the optimum speed for machining time minimization would be different from the optimum speed for production cost minimization. i. true. il. false. ii. the statement is true or false depending on other conditions. iv. not sure. i will take the penalty

answer

Answers: 2

Show answers

Similar questions

Предмет

Engineering, 19.07.2019 22:30, cluchmasters5634

Cutting and abrasive machining are the two major material processes. list the differences between cutting tool and abrasive machining tool.

Answers: 1

Предмет

Engineering, 26.07.2019 19:10, Northshoreranch

In a machining operation that approximates orthogonal cutting, the cutting tool has a rake angle 8°. the chip thickness before the cut to= 0.15 mm and the chip thickness after the cut tc=0.3375 mm. calculate: a) the shear plane angle and the shear strain in the operation b) the shear strength of the work material assuming the cutting and thrust force were measured to be fc = 679.5 n and ft=535.5n. the width of the orthogonal cutting operation is w= 2.5 mm. c) the friction and the coefficient angle d) the cutting power and specific energy in the machining if the cutting speed 60 mm/min

Answers: 1

Предмет

Engineering, 13.09.2019 23:30, cheesedoodle

An engineer machines annealed copper in an orthogonal machining experiment. given: cutting speed: 4m/min(13.1 ft/min) depth of cut: 1.17 mm (0.046 in) machine efficiency; 98% width of cut 6 mm (0.236 in) tool material: aluminum oxide coated carbide tool geometry: 2degree relief angle. -5degree rake angle, 5degree clearance angle. 1.75mm (0.069 in) nose radius cutting fluid: synthetic oil (coefficient of friction -0.1) use us standard units for all your work. calculate the shear angle when machining with synthetic oil. calculate the required horse power for the machine engine (motor).

Answers: 1

Предмет

Engineering, 18.10.2019 20:00, bailey1025

Aslab-milling operation will take place on a 6061 aluminum (free machining) 12" long and 2" wide piece of material. a spiral, helical cutter 3" in diameter with 12 teeth will be used. if the feed per tooth (f) is 0.007 inches/tooth and the cutting speed (v) is 444 sfm. find the machining time.

Answers: 2

Do you know the correct answer?

In machining, if the cost to purchase/regrind the cutting tool=$0.00, the optimum speed for machinin...

Questions in other subjects:

Konu

Chemistry, 24.04.2020 20:03

In general, what does a spectrometer do? 2. What parts of the electromagnetic spectrum are most commonly analyzed by spectrometers? 3. What are the parts of a spe...

Konu

German, 24.04.2020 20:03

Create a conversation in the german language which two people discuss two advantages and two disadvantages of living in a city. One person prefers to live in the city and the other...

Konu

Biology, 24.04.2020 20:03

An embryo goes through different processes after fertilization. One of these processes is mitosis. A. True B. False...

Konu

Mathematics, 24.04.2020 20:03

I need help ASAP Please and thanks...

Konu

Mathematics, 24.04.2020 20:03

Classify the triangle please....

Konu

History, 24.04.2020 20:03

How did Franklin Roosevelt’s time spent in Georgia contribute to his policies when he became president? A. it motivated him to develop programs to address poverty in rural areas B....

Konu

History, 24.04.2020 20:03

After ratification of the Fifteenth Amendment, how many African Americans served in Congress in the late 1800s? less than five about twenty more than fifty...

Konu

Business, 24.04.2020 20:03

Gould Corporation uses the following activity rates from its activity-based costing to assign overhead costs to products: Activity Cost Pool Activity Rate Setting up batches $ 59.3...

Konu

Business, 24.04.2020 20:03

In 1999, at a meeting of the World Trade Organization in Seattle, Washington, a large number of people protested attempts to reduce trade barriers. What is a reason why some would...

Konu

Biology, 24.04.2020 20:03

The process of plants turning light and carbon dioxide in sucrose and glucose is called:...

Other tasks in the category: Engineering More task