Which of the following characterizes a un-cold-worked steel in comparison with a cold-worked steel? i. higher yield strength ii. better surface smoothness iii. greater hardness iv. greater toughness v. less ductility (a) i and v (b) ii only ) iii and iv d) none of the above

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.