Engineering, 26.07.2019 17:10, tapiamelissa6

In a refinery, hot flue gasses at 1800°c are cooled by a fluid at 25°c with the gas and liquid side heat transfer coefficients being 50 and 500 w/m2-k, respectively. the wall that separates the gas and liquid side is composed of stainless steel and has a thickness 1cm. assuming no contact resistances, determine: a)- the rate of heat losses per unit area from the gas to the liquid. b)- will the wall melt on the gas side? the solidus temperature of the stainless steel is 1400°c data for stainless steel: k-25 w/m. k

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 19:20, nikkiebartels

Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer, e = 5 × 105?

Answers: 2

continue

Engineering, 06.07.2019 03:20, Anonymous7170

Explain in your own word the concept of a solid solution, in alloys, and how it can be created.

Answers: 3

continue

Do you know the correct answer?

In a refinery, hot flue gasses at 1800°c are cooled by a fluid at 25°c with the gas and liquid side...