Engineering, 19.07.2019 21:10, shekinahconnoll3904

Astream of ammonia is cooled from 100°c to 20°c at a rate of 1800 kg/hr in the tube side of a double-pipe counter-flow heat exchanger. water enters the heat exchanger at 10°c at a rate of 2500 kg/hr. the outside diameter of the inner tube is 3 cm and the length of the pipe is 7m. using the log-mean temperature difference, calculate the overall heat transfer coefficient (u) for the heat exchanger. 2. a. determine the heat transfer rate between the two fluids b. determine the outlet temperature of the water. c. determine the heat transfer surface area. d. determine the log-mean temperature difference. e. determine the heat transfer coefficient for the heat exchanger. cp for ammonia is 5234j/kgk and cp for water is 4180j/kgk.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Do you know the correct answer?

Astream of ammonia is cooled from 100°c to 20°c at a rate of 1800 kg/hr in the tube side of a double...