Engineering
Engineering, 19.07.2019 21:10, calhountoiyonou0gjb

Asteel bar has the following properties: sf = 40 kpsi, sy = 60 kpsi, sut = 80 kpsi. the bar is subjected to a steady torsional stress of 20 kpsi and an alternating bending stress of 10 kpsi. find: a. the factor of safety guarding against a static failure b. the factor of safety guarding against a fatigue failure

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Do you know the correct answer?
Asteel bar has the following properties: sf = 40 kpsi, sy = 60 kpsi, sut = 80 kpsi. the bar is subj...

Questions in other subjects:

Konu
Mathematics, 20.01.2021 01:00