Engineering, 19.07.2019 20:30, keiryporthillo

Afluid with a relative density of 0.9 flows in a pipe which is 12 m long and lies at an angle of 60° to the horizontal at the top, the pipe has a diameter of 30 mm and a pressure gauge indicates a pressure of 860 kpa. at the bottom the diameter is 85 mm and a pressure gauge reading is 1 mpa. assume the losses are negligible and determine the flov rate. does the flow direction matter?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Do you know the correct answer?

Afluid with a relative density of 0.9 flows in a pipe which is 12 m long and lies at an angle of 60°...