Engineering, 19.07.2019 20:30, diamondgodbee123

Aflexible machine part was observed to vibrate excessively at 20 hz due to a harmonic force of unknown amplitude. it was concluded that vibration was large because the harmonic force coincided with the natural frequency of the flexible part. when the harmonic force was not present, a 0.5 kg mass was placed on the flexible part and a static displacement of 3.0 mm was observed. the mass was then removed. a) the flexible part is to be modelled as a one degree-of-freedom, mass-spring-damper system. what mass and stiffness would be appropriate? b) a tuned vibration absorber is used to eliminate the vibration at 20 hz. if a mass of 0.03 kg is used for the absorber, what stiffness is required? c) if the amplitude of the absorber mass at 20 hz was observed to be1 cm, what is the amplitude of the harmonic force acting on the flexible part?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Do you know the correct answer?

Aflexible machine part was observed to vibrate excessively at 20 hz due to a harmonic force of unkno...