Engineering, 19.07.2019 20:30, jnelso5437
Aflywheel made of grade 30 cast iron (uts = 217 mpa, ucs = 763 mpa, e = 100 gpa, density = 7100 kg/m, poisson's ratio = 0.26) has the following dimensions: id = 150mm, od = 250 mm and thickness = 37 mm. what is the rotational speed in rpm that would lead to the flywheel's fracture?
Answers: 2
= 150 mm 
= 250 mm 
- 
) x 
------------(1)
+ UCS x 
)
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 06.07.2019 03:10, tyheath42
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k, p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
Do you know the correct answer?
Aflywheel made of grade 30 cast iron (uts = 217 mpa, ucs = 763 mpa, e = 100 gpa, density = 7100 kg/m...
Questions in other subjects:
Mathematics, 28.05.2021 21:00
Mathematics, 28.05.2021 21:00
Mathematics, 28.05.2021 21:00
Mathematics, 28.05.2021 21:00
Social Studies, 28.05.2021 21:00
