Engineering, 19.07.2019 01:30, Cjohnston742

Water is drawn steadily by a pump at a volumetric flow rate of 0.8 m/min through a pipe with a 10 cm diameter inlet. the water is delivered to a tank placed at a height of 10 m above the pipe inlet. the water exits through a nozzle having a diameter of 2.5 cm. water enters at 25°c and 1 atm pressure but there is no significant change in pressure and temperature at exit. six percent of the power input to the pump is dissipated in the form of heat into the surroundings. take the value of acceleration due to gravity (g) equal to 9.8 m/s determine (a) the velocity of the water at the inlet and exit and (b) the power required by the pump.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 19:10, netflixacc0107

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

continue

Engineering, 04.07.2019 19:20, lovenahofer

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

continue

Do you know the correct answer?

Water is drawn steadily by a pump at a volumetric flow rate of 0.8 m/min through a pipe with a 10 cm...