Engineering, 18.07.2019 22:30, alove1777

The compression ratio of an air-standard otto cycle is 9.5. prior to the isentropic compression process, the air is at 100 kpa, 35°c, and 600 cm3. the temperature at the end of the isentropic expansion process is 800 k. using specific heat values at room temperature, determine: (a) the highest temperature and pressure in the cycle; (b) the amount of heat transferred in, in kj; (c) the thermal efficiency; and (d) the mean effective pressure.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Do you know the correct answer?

The compression ratio of an air-standard otto cycle is 9.5. prior to the isentropic compression proc...