Engineering, 18.07.2019 22:20, mrgoggles12

The bar has a mass of 1.5 kg and a length of 25 cm, and is positioned in a smooth groove in the turntable, which is initially rotating at 400 rpm. the turntable has a radius of 30 cm, a mass of 15 kg and a radius of gyration of 20 cm. initially the midpoint of the bar is coaxial with the axis of rotation. if it is given a slight push, it will migrate to the edge of the turntable. determine the rotational velocity of the turntable when the end of the bar reaches the edge of the disc. ignore the effect of friction. 400 rpm

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 05.07.2019 10:10, johns2380

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

continue

Do you know the correct answer?

The bar has a mass of 1.5 kg and a length of 25 cm, and is positioned in a smooth groove in the turn...