Engineering
Engineering, 18.07.2019 21:30, akimadixon13

Steam at 1.2 mpa and 320°c enters a diffuser steadily with a velocity of 150 m/s, and leaves at 3 mpa with a velocity of 50 m/s. during transit through the diffuser, 3 kj/kg of heat is lost to the atmosphere. a) sketch the diffuser and label the states. b) what is the specific enthalpy of the steam entering the diffuser? c) determine the specific enthalpy of the steam at the exit. d) determine the exit temperature of the steam. e) find the change in specific entropy of the steam as it passes through the diffuser.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, juansoto227711
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
image
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Do you know the correct answer?
Steam at 1.2 mpa and 320°c enters a diffuser steadily with a velocity of 150 m/s, and leaves at 3 mp...

Questions in other subjects:

Konu
Mathematics, 30.03.2020 23:13