Engineering
Engineering, 18.07.2019 20:30, eks8252

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.128 kg/s, and it leaves at 0.7 mpa and 50°c. the refrigerant is cooled in the condenser to 24°c and 0.65 mpa, and it is throttled to 0.15 mpa. disregarding any heat transfer and pressure drops in the connecting lines between the components determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor kw (round to one decimal place) kw (round to two decimal places) in (b) the isentropic efficiency of the compressor, % (round to one decimal place) and (c) the cop of the refrigerator cop round to two decimal places)

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Do you know the correct answer?
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c...

Questions in other subjects:

Konu
Social Studies, 02.07.2019 12:40