Engineering, 18.07.2019 03:40, aquez356
During a tensile test, the strain corresponding to a stress of 5000psi was 167uin/in. at 20,000psi, the strain was 667uin/in. a. if the proportional limit is 30,000psi, what is the modulus of elasticity (young's modulus) for the specimen being tested? b. what stress corresponds to a strain of 200uin/in? c. will the result from part b still hold if the proportional limit is 18,000psi? explain your an answer
Answers: 2
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
During a tensile test, the strain corresponding to a stress of 5000psi was 167uin/in. at 20,000psi,...
World Languages, 23.10.2019 13:00
English, 23.10.2019 13:00
Mathematics, 23.10.2019 13:00
Chemistry, 23.10.2019 13:00
Biology, 23.10.2019 13:00