Engineering
Engineering, 18.07.2019 00:20, adamgala3885

An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. the state of air at the beginning of the compression process is 95 kpa and 20°c. if the maximum temperature in the cycle is not to exceed 2200 k, determine (a) the thermal efficiency and (b) the mean effective pressure. assume constant specific heats for air at room temperature.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
image
Engineering, 04.07.2019 18:20, myahlit84
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 19:10, jrcspiderman2003
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
image
Engineering, 06.07.2019 02:30, sandy2597
Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).
Answers: 1
Do you know the correct answer?
An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. the state of...

Questions in other subjects:

Konu
Mathematics, 12.02.2022 02:20
Konu
Mathematics, 12.02.2022 02:20
Konu
Mathematics, 12.02.2022 02:20