Engineering, 17.07.2019 23:40, josuep425

An aluminum block weighing 34 kg initially at 140°c is brought into contact with a block of iron weighing 48 kg at 60c in an insulated enclosure. determine the final equilibrium temperature and the total entropy change for this process. the specific heat of aluminum at 400 k is cp 0.949 kj/kg k. the specific heat of iron at room temperature is cp 0.45 kj/kg a)-the final equilibrium temperature is k b)-the total entropy change for this process /k.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Do you know the correct answer?

An aluminum block weighing 34 kg initially at 140°c is brought into contact with a block of iron wei...