Engineering
Engineering, 17.07.2019 23:30, Deemon

Air flows through a constant area duct. the pressure and temperature of the air at the inlet to the duct are p1 = 100 kpa absolute, and t1 = 298 k, respectively. inlet mach number is m1 = 0.1. heat is transferred to the air as it flows through the duct and as a result the mach number at the exit increases. a)-find the pressure and temperature at the exit, while the exit mach number changes between m=0.2 to 0.99 with increments of m=0.01. b)-find the amount of heat that is transferred to the air per unit mass of air.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, mm016281
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Do you know the correct answer?
Air flows through a constant area duct. the pressure and temperature of the air at the inlet to the...

Questions in other subjects:

Konu
History, 05.12.2019 06:31