Engineering, 17.07.2019 23:30, wizz2966

Air enters the heating section of an air-conditioning at 1 atm, 10 c, and 70 percent relative humidity at a rate of 35 m'/min, and it leaves the humidifying section at 20 c with a relative humidity of 90 percent. if the humidifier supplies wet steam at 100°c, determine (a) the temperature and relative humidity of the air leaving the heating section (b) the rate of heat transfer in the heating section

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Engineering, 04.07.2019 19:10, pjgolden04

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbug2121

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

continue

Do you know the correct answer?

Air enters the heating section of an air-conditioning at 1 atm, 10 c, and 70 percent relative humidi...