Engineering, 17.07.2019 22:20, chaeyoung22

Aroom is kept at -5c by a vapour comprression refrigeration cycle with r-134a as the refrigerant. heat is rejected to cooling water that enters the condenser at 20°c at a rate of 0.13 kg/s and leaves at 28°c. the refrigerant enters the condenser at 1.2 mpa and 50°c and leave as a saturated liquid. if the compressor consumes 1.9 kw of power, determine: a) the refrigeration load and cop, the second law efficiency of the refrigerator and the total exergy destruction in the cycle, and b) c) the exergy destruction in the condenser

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Do you know the correct answer?

Aroom is kept at -5c by a vapour comprression refrigeration cycle with r-134a as the refrigerant. he...