Engineering, 17.07.2019 21:20, emilyturchon
Amaterial is subjected to a horizontal tensile stress of 90 mpa, a vertical tensile stress of 120 mpa and a shear stress of 75 mpa. find: . the principal stresses .the maximum shear stress the shear stress, acting alone that would produce the same the single tensile stress, acting alone that would produce the same principal stresses maximum shear stress
Answers: 1
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Amaterial is subjected to a horizontal tensile stress of 90 mpa, a vertical tensile stress of 120 mp...
Chemistry, 05.05.2020 15:00
Mathematics, 05.05.2020 15:00
Social Studies, 05.05.2020 15:00
Mathematics, 05.05.2020 15:00
History, 05.05.2020 15:00
Social Studies, 05.05.2020 15:00
Advanced Placement (AP), 05.05.2020 15:00