Engineering

Engineering, 13.07.2019 00:30, ssssss190

Assuming the clutch undergoes uniform wear determine the actuating force, fn required to keep the ciutch plates engaged. physical limitations make the outer radius of the plate, r2=8 inches. the co-efficient of friction, u=0.35 for the clutch plates.

answer

Answers: 2

Show answers

Similar questions

Предмет

Engineering, 26.07.2019 16:10, LindaCat78

Amultiple disk clutch, steel on bronze, is to transmit 4.5 hp at 710 rpm. the inner radius of contact is 1.0 in, and the outer radius of contact is 2.6 in. the clutch operates in oil with an expected coefficient of friction 0.125. the average allowable pressure is 47 psi, maximum. assuming uniform wear, determine the followings: a. how many total disks of steel and bronze are required? b. what axial force is required? c. what is the average pressure? d. what is the actual maximum pressure?

Answers: 1

Предмет

Engineering, 26.07.2019 19:10, QuarkyFermion

Amulti-plate clutch connects two in-line shafts, through 4 plates on the driving and 3 plates driven shaft. the plates have inner and outer diameters 120 and 180mm respectively, with coefficient of friction between the plates of 0.28. the clutch transmits 9 kw at 750 rev/min determine: a)- the axial force between the plates b)- the pressures at the inner and at the outer radi c)- the included angle of a cone clutch that would transmit the same power with the same axial force

Answers: 2

Предмет

Engineering, 07.08.2019 19:30, cbogrett

Asoft surface cone clutch must handle 1865 in-lb of torque at 1250 rpm. the large diameter of the clutch is 13.75 in, the cone pitch angle is 6.25°, the face width is 2.50 in, and the coefficient of friction is 0.20. determine: a. the axial force required to transmit the torque b. the axial force required to engage the clutch, fe, engagement taking place when the clutch is not rotating c. the average normal pressure on the contact surfaces when the maximum torque is being transmitted d. the maximum normal pressure assuming uniform wear

Answers: 1

Do you know the correct answer?

Assuming the clutch undergoes uniform wear determine the actuating force, fn required to keep the ci...

Questions in other subjects:

Konu

English, 20.09.2020 03:01

Which of Kallie's actions was MOST important in helping her gain confidence? A. glancing out the window B. watching people pass by C. counting to ten O D....

Konu

Mathematics, 20.09.2020 03:01

F(x)=2x+3, and g(x)=4x-2. what is f(x)+g(x)...

Konu

Mathematics, 20.09.2020 03:01

Barones Italian restaurant advertises that it’s customers are much happier than the customers of its main competitors. The claim is based on the results of a customer satisfaction...

Konu

Mathematics, 20.09.2020 03:01

I need help ASAP please and thank you!!:) ...

Konu

Health, 20.09.2020 03:01

The , or mental , effects of long-term stress include \...

Konu

Mathematics, 20.09.2020 03:01

A bookstore sells paperback fiction books in excellent condition for $2.50 and in fair condition for $0.50. Write an expression for the cost of buying 'x' excellent-condition paper...

Konu

Mathematics, 20.09.2020 03:01

Two numbers that are the same distance from 0 on a number line, but in opposite directions, are called opposites. The whole numbers and their opposites make up the set of integers....

Konu

Mathematics, 20.09.2020 03:01

Someone help FAST ! It’s talking about integers. ...

Konu

Social Studies, 20.09.2020 03:01

In the early 20th century, it was not uncommon to hear recommendations of keeping your money under a mattress instead of at a bank. Why or why wouldn't this be good advice today?...

Konu

Mathematics, 20.09.2020 03:01

What is the measure of the smallest angle in the figure? The figure is not drawn to scale.

Other tasks in the category: Engineering More task