Aduct with a triangular cross section has one of its sides heated by a heater at 1.0 kw/m" rate. the heated surface has emissivity of 0.75. as a result, the two other surfaces are heated and maintained at 227 ? . the duct is very long, thus, the radiation exchange through the open ends is minimal and can be neglected. if the three sides of the cross section are each 200 cm long, determine the temperature of the heated surface (surface 1).

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false