Engineering, 11.07.2019 02:40, hei40563273

A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a steel tube. the150mm long steel tube has 40.02mm outer diameter and 25mm internal diameter. the steel tube is subject to an internal pressure of 20mpa. what is the resulting interference pressure between the bush and the tube, assuming that their nominal diameters are 40mm? the young's modulus for steel should be taken as 200gpa and the poisson's ratio as 0.28

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Do you know the correct answer?

A100mm long steel bush with 39.98mm internal diameter and 60mm outer diameter is force fitted onto a...