Two kg of refrigerant 134a contained in a piston-cylinder assembly is initially at 4 bar and 70°c. the refrigerant undergoes a constant pressure process to a final state of a saturated vapor. kinetic and potential energy effects can be neglected. a) show the process on a pv diagram b) determine the work for the process, in kj c) determine the heat transfer during the process, in kj

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?