Asmall-appliance circuit will be protected by a circuit breaker rated at a. 15 a. b. 20 a. c. 30 a. d. 50 a.

Who needs to approve a change before it is initiated? (select two.) -change board -client or end user -ceo -personnel manager -project manager

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

In deadlock avoidance using banker’s algorithm, what would be the consequence(s) of: (i) a process declaring its maximum need as maximum possible for each resource. in other words, if a resource a has 5 instances, then each process declares its maximum need as 5. (ii) a process declaring its minimum needs as maximum needs. for example, a process may need 2-5 instances of resource a. but it declares its maximum need as 2.