Computers and Technology, 14.07.2019 11:40, natalie2sheffield

How do you determine the orientation of orthogonal projections in a multi-view drawing?

Answers: 1

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 22.06.2019 12:20, crodriguez87

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Answers: 3

continue

Computers and Technology, 23.06.2019 15:00, puppylove899

Barbara is interested in pursuing a career in the science and math pathway. which qualifications will her reach that goal? a. an advanced knowledge of physics and math b. an advanced knowledge of engineering and math c. an advanced knowledge of physics and robotics an d. advanced knowledge of machinery and math

Answers: 1

continue

Computers and Technology, 23.06.2019 16:30, rileysndr1782

Monica and her team have implemented is successfully in an organization. what factor leads to successful is implementation? good between different departments in an organization leads to successful is implementation.

Answers: 1

continue

Computers and Technology, 24.06.2019 16:00, miner12924owhu4d

5.a fishing rod is formed from a composite material of 0.5 kg of glass fibers embedded in a matrix of 0.5 kg of epoxy resin. the glass fibers are assumed to be long, continuous and unidirectional. to achieve a greater stiffness it is proposed to use a different composite that is comprised of long continuous carbon fibers that will be embedded in a matrix of 0.5 kg of epoxy resin. if the modulus of elasticity of the carbon fiber composite is 10% greater than the elastic modulus of the glass fiber composite, estimate the mass of carbon fibers that will be used to make the carbon fiber composite. assume the applied tensile stress is parallel to the direction of the long axis of the fibers. the epoxy resin, glass fiber, and carbon fiber have an elastic modulus of 5, 86, and 350 gpa respectively and a density of 1100, 2500, and 1800 respectively.