A. experiment by purposely misconfiguring the gateway address on pc-a to 10.0.0.1. what happens when you try and ping from pc-b to pc-a? do you receive a reply?

It policy compliance and emerging technologies respond to the following: propose at least three control measures that organizations need to put in place to ensure that they remain complaint with emerging technologies and in a continually changing it environment. examine the correlation of effective configuration management and change control procedures to remain compliant with emerging technologies and it security changes.

Write a modular program (no classes yet, just from what you learned last year), that allows two players to play a game of tic-tac-toe. use a two-dimensional char array with 3 rows and 3 columns as the game board. each element of the array should be initialized with an asterisk (*). the program should display the initial board configuration and then start a loop that does the following: allow player 1 to select a location on the board for an x by entering a row and column number. then redisplay the board with an x replacing the * in the chosen location. if there is no winner yet and the board is not yet full, allow player 2 to select a location on the board for an o by entering a row and column number. then redisplay the board with an o replacing the * in the chosen location. the loop should continue until a player has won or a tie has occurred, then display a message indicating who won, or reporting that a tie occurred. player 1 wins when there are three xs in a row, a column, or a diagonal on the game board. player 2 wins when there are three ox in a row, a column, or a diagonal on the game board. a tie occurs when all of the locations on the board are full, but there is no winner. input validation: only allow legal moves to be entered. the row must be 1, 2, or 3. the column must be 1, 2 3. the (row, column) position entered must currently be empty (i. e., still have an asterisk in it).

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?